Publicidad
Idiomas disponibles
Idiomas disponibles
Operation / Function
Hot-melt glue applicator for use with
genuine STEINEL glue sticks. The tool
Tool features
1. Nozzle (exchangeable with GlueMatic 3011)
2. Fold-out stand
3. Trigger
4. Power cord
Example applications
L Craftwork
L Decorating
L Repairing
L Fastening
Startup / Function
L Rest applicator on wire stand (placing
a piece of cardboard or wood
underneath it if necessary).
L Let the applicator heat up for approx.
7 minutes.
L Press trigger and apply glue to one
side.
L Firmly press together the materials
being glued, correcting alignment if
necessary.
L Rigid foam (e.g. polystyrene) can also
be glued without a problem. Merely
remember to apply the hot glue on the
Disposal
Electrical and electronic equipment, ac-
cessories and packaging must be recycled
in an environmentally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic
waste.
must only be used indoors in a dry and
well-ventilated environment.
base surface and not, for example, on
the polystyrene
L Spot gluing is recommended on long
items with large surfaces.
L When gluing textiles or similar
materials, it is recommended to apply
the hot glue in "wavy" lines.
L After use, place the appliance on the
stand and let it cool down.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equipment
and its implementation in national law,
electrical and electronic equipment no
longer suitable for use must be collected
separately and recycled in an environmen-
tally compatible manner.
- 14 -
Publicidad
