ASSEMBLY INSTRUCTIONS
10.Install cam bolt (BB) on top panel, Insert wood dowels
(CC) into top rail(A). Attach top panel (B) and top rail to
securing with M4 x 32 mm screws (HH).
Hardware Used
BB
Cam Bolt
CC
Wood Dowel
M4 x 32 mm Screw
HH
11.Insert wood dowels (CC) into back panel (D) and side
panel left (E), side panel right (F). Attach top panel (B),
securing with large cam lock (AA).
Hardware Used
AA
Large Cam Lock
CC
Wood Dowel
12.Insert the drawer into the assembly by pressing
down the release levers on the slide runners and
sliding the drawer into the tracks of slides.
10
BB
HH
B
x 6
x 2
CC
A
x 2
11
x 10
AA
CC
x 4
F
12
JJ
9
ASSEMBLY INSTRUCTIONS
Wall Hanging Installation
13.Using a stud finder (not included), find 2 stud locations
in the wall and mark them with a pencil (not included).
Draw a level line at the desired installation height for wall
shelf. If no studs are available, or if the wall is made with-
out studs, it is your responsibility to choose the appropri-
ate hardware. The unit MUST be securely attached to the
wall for safety and to be eligible for warranty.
14.Secure shelf to the wall at marked stud locations with
M4 x 60 mm screw (FF).
B
E
Hardware Used
M4 x 60 mm Screw
FF
D
CARE AND MAINTENANCE
• Periodically check to make certain all components are properly positioned, free from damage and
firmly connected.
• Use a soft, clean cloth that will not scratch the surface when dusting.
• Never use water to clean the furniture as it may damage to the finish.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
• In the event the furniture is stained or otherwise damaged during use, it is recommended
you call a professional to repair the furniture.
• Keep furniture away from direct sunlight as it may damage the finish.
• It is best to keep the furniture in a climate-controlled environment. Extreme temperature and hu-
midity changes can cause fading, warping, shrinking and splitting of wood.
Wooden Stud
13
Stud locations
Level line
Wooden Stud
14
x 2
FF
10