Kärcher K 3.48 Manual De Usuario página 10

STEP 3:

Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
STEP 4:

To rinse, move the VPS out of "Mix"
position and pull trigger to operate
unit.
STEP 5:

Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
TAKING A BREAK ... five minutes or more
STEP 1:

Release trigger and engage gun
safety lock.
10 English
All manuals and user guides at all-guides.com
For best results see Cleaning Tips for
specific information on how to clean
different surfaces.
Always Use Kärcher
Best Results
Kärcher
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won't clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
life. For Kärcher
your retailer or visit our website:
www.buykarcher.com
Never use:
–
–
–
–
–
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.

®
® biodegradable detergents are
® detergents, check
CAUTION
Bleach, Chlorine products and other
corrosive chemicals
Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
Tri-sodium phosphate products
Ammonia products
Acid-based products
STEP 2:
Turn pressure washer to OFF (0) po-
sition.
Detergent for