Bauknecht HIR4 EI8VS3 PT R Guía De Consulta Diaria página 18

4. FAST PREHEATING
Turn the selection knob to the symbol
fast preheating function and confirm by pressing the
selection/confirmation button: the settings are shown
on the display.
If the proposed temperature is that desired, press
the selection/confirmation button. To change the
temperature, proceed as described in previous
paragraphs.
PRE
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the
oven, close the door and start cooking.
At the end of preheating, the oven automatically
selects the conventional function: If you wish to set a
different cooking function, turn the selection knob and
select the desired function.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the oven
to reach using the adjustment knob.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
Press the selection/confirmation button to continue
cooking in manual mode (without a programmed
cooking time) or turn the adjustment knob to extend
the cooking time by setting a new duration.
In both cases, the temperature or the grill level
settings will be retained.
BROWNING
Some functions of the oven enable you to brown
the surface of the food by activating the grill once
cooking is complete.
PRESS
When the display shows the relevant message, if
required press the selection/confirmation button to
start a five-minute browning cycle.
You can stop the function at any time by turning the
selection knob to to switch the oven off.
6
. TIMER
to select the When the oven is switched off, the display can be
used as a timer. To activate this function, make sure
that the oven is switched off and turn the adjustment
knob: The
Turn the adjustment knob to set the length of time
you require and then press the selection/confirmation
button to activate the timer. An audible signal will
sound and the display will indicate once the timer has
finished counting down the selected time.
Please note: The timer does not activate any of the cooking
cycles. Use the adjustment knob to change the time set on
the timer; turn the selection knob to
off at any time.
. COOKTOP OPERATION
(see the instructions supplied with the cooktop).
The oven control panel features 4 adjustable knobs
for cooktop operation.
The cooktop control knobs are marked with a
numerical scale corresponding to different power
settings.
Please note: The - symbol on the cooktop control knobs
indicates that there are no corresponding functions, and
therefore, in that position, the cooking zone switches off.
Turn the control knob of the relevant hotplate
clockwise to the desired power setting.
icon will flash on the display.
to switch the timer