Mutsy Safe2go Manual De Instrucciones página 21

· When you don`t want it to be a rocking bouncer,
push the buttons 5 on either side of the carrying
handle and revolve it into position 4 (fig. D).
Use on a Mutsy frame (see fig. J+K)
· The Safe2go car seat can also be fitted on each
Mutsy frame; revolve the element 1 and 2 placed
under the shell (fig. J) and couple up the safety car
seat with the frame inserting the clasping pins (on
the elements 1 and 2) into the Universal clicking
system 3 of the frame. (fig. K). Make sure that the
Safe2go is fixed properly and that the red surfaces
on the Universal clicking system of the frame are
fully covered.
· Fitted on a Mutsy frame, there are 2 possible posi-
tions (1 and 2 shown on fig. K) to use the safety car
seat. When your baby is sleeping, you can revolve
the safety car seat into position 2 by pushing the
buttons 4 placed in front of the car seat.
! For use in a car the elements 1 and 2 (fig. J) have
to be revolved back under the car seat.
! It is dangerous to put the car seat on high sur-
faces.
! Never lift the pushchair when a child is in it.
15
English