Publicidad
Idiomas disponibles
Idiomas disponibles
4. Transport and storage
The compressor is shipped in cardboard that protects the product from damage during transport.
Caution! Always use the original packaging to secure the compressor in the upright
position.
Protect the compressor from humidity and extreme temperatures during transport and
storage. A compressor in its original packaging can be stored in a warm, dry and dust
free area. Max humidity: 70%. Min. Temperature -10°C, Max. Temperature: +40°C.
5. General Check
Remove compressor from the package and check that there are no evident signs or damage and imme- diately
notify to the carrier.
6. Product information
6.1 Use for the Intended Purpose
The compressor is intended to be used for generating compressed air required for operating dental units of, for
similar dental applications and other applications where oil-free compressed air is required.
Installation in medical care facilities:
In designing and constructing the compressor, allowance has been made for the requirements of medical
products where applicable. Accordingly, the unit can be used for installation in medical care facilities. If the unit
is installed in medical care facilities, the requirements stipulated in Directive 93/42 EEC IEC 601-1 as well as
the relevant norms must be observed as applied to installation and assembly.
6.2 Use other than that for the Intended Purpose
The compressed air produced by the compressor is unsuitable for operating breathing equipment or simi- lar
facilities without additional filters required for the operating area.
• The compressors are designed to be operated in dry, ventilated rooms, ambient temperature +5 to +40 °C.
• Do not expose the compressor to rain. The machine must not be operated in a damp or wet environment.
Use is also prohibited in proximity to gases or combustible liquids.
• Prior to installing the compressor in medical facilities, it must be ensured that the available medium complies
with the requirements stipulated for the relevant purpose in each individual case.
When installing, classification and conformity rating must be carried out by the manufacturer of the ultimate
product.
• When installed in medical care facilities, the electrical equipment needs special precautions regarding EMC
and needs to be installed according to EMC information
• The compressor should not be used adjacent to or stacked with other equipment and if adjacent or stacked
use is necessary, the compressor should be observed to verify normal operations in the configuration in which
it will be used
• Please consider that mobile RF communications equipment can effect the compressor electrical equip- ment
• Any other use or use beyond what is specified is deemed to be not for the intended purpose. The manu-
facturer accepts no liability for damage resulting there from. All risk is borne solely by the operator/user.
6.3 Product Description
The compressor generates an oil-free, dry (versions with air dryers only) and filtered compressed air required
for operating units or dental equipment.
7. Where to install the compressor
Room where compressor has to be installed should be large, well ventilated and protected from dust and
intense cold; a dusty environment will cause damages and difficulties in operation.
13
Publicidad
