Airzone Aidoo Pro AZAI6WSP Serie Guia De Inicio Rapido página 8

Advanced settings
EN
AIRZONE CLOUD
Information
Name. Name of the device.
MAC. MAC address of the device.
Version. Displays the webserver version of the device.
Wi-Fi. Network linked to the device.
IP address. Displays the IP address of the device.
Integration. Integrations available through the webserver. Allows you to make the following
configurations depending on the integration selected:
•
Modbus RS485. Edition of the Modbus ID and selection of communication speed.
•
BACnet MS/TP. Edition of MAC address, BACnet ID, communication speed, max master
nodes and max frames.
•
AirQ. Device for air purification by ionization.
Indoor unit*. Displays the following information for the indoor unit: manufacturer, thermostat
units (configurable in °C or °F), zone temperature and return temperature.
Settings
Auxiliary heat. Allows you to activate or deactivate this function and make the configurations:
•
Delta On. Offset applied to the set-point temperature when activating the auxiliary
heating mode.
•
Delta Off. Offset applied to the set-point temperature for turning off the auxiliary heat.
•
Delay time. Sets the delay time between selectable values.
•
Type of ventilation. Allows you to choose between Ducted heating or External auxiliary
heat.
Locking. Sets a lockout outdoor temperature for activation of the Auxiliary Heat function. If the
outdoor temperature is higher than the set lockout temperature, the Auxiliary Heat function
will not be activated even if the activation conditions are met.
Range: - 0 °F (- 17.8 °C) / 65 °F (18.3 °C).
Note: For units that do not have the "Outdoor temperature" parameter, the outdoor
temperature provided by the Cloud will be taken as the default.
* Not available in Bluetooth configuration.
8
To perform advanced
configuration of the device,
download the Airzone Cloud
app.
To access the advanced
configuration, follow the
steps described in
installation manual.
the