Descargar Imprimir esta página

Brita Memo Manual De Instrucciones página 20

Ocultar thumbs Ver también para Memo:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 57
Memo
Please see illustrations on page IV
To ensure optimum performance you should change your
BRITA filter cartridge on a regular basis. For best results
change your cartridge every four weeks.
The unique "BRITA Memo" measures the recommended
time of use of your cartridge. Memo is easy to use and
automatically reminds you when to change your cartridge.
12
To start / reset the exchange indicator (Memo)
To start Memo please press and hold down the start button
on the lid until all four bars appear in the display and flash
twice. The Memo is now set. A small flashing dot in the
bottom right hand corner of the display will show that the
Memo is working.
After each week one bar will disappear to show the
remaining cartridge life.
Change the filter cartridge when all the bars have disappe-
ared and an arrow starts to flash after approximately
four weeks. A new cartridge should be primed and inserted
and the exchange indicator reset as above (please follow
illustrations 5.1 to 5.5).
Note: When one bar remains in the display ensure that
you have a new cartridge ready for exchange.
Remember: The BRITA Memo is designed to be used
only with the original BRITA cartridge range.
The BRITA cartridge
The BRITA cartridge reduces substances like chlorine,
limescale and heavy metals. To achieve optimum filter
performance BRITA recommend that if you have re-filled
the funnel 2–3 times in quick succession you should allow
the cartridge to rest by not refilling the funnel again for 15–
30 minutes. You will enjoy cleaner, clearer, great tasting
water for hot and cold drinks and delicious food. Also your
domestic appliances will have less scale build up.
GA_Memo-Classic.indd 20
GA_Memo-Classic.indd 20
ENGLISH
Illustration 5
Illustration 5.1 to 5.3
Illustration 5.4
Illustration 5.5
22.02.2006 16:40:38 Uhr
22.02.2006 16:40:38 Uhr

Publicidad

loading