Disposal And Recycling; Ordering Replacement Parts - EINHELL TC-AC 420/50/10 V Manual De Instrucciones Original

Ocultar thumbs Ver también para TC-AC 420/50/10 V:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

8.6 Cleaning the intake fi lter (1)
The intake fi lter prevents dust and dirt being
drawn in. It is essential to clean this fi lter after at
least every 300 hours in operation.
A clogged intake fi lter will decrease the
compressor's performance dramatically. Undo the
screw on the air fi lter so that the halves of the air
fi lter housing can be opened. Use compressed air
at low pressure (approx. 3 bar/0,3 MPa/44 psi) to
blow out all the parts of the fi lter and then assem-
ble the fi lter in reverse order. When cleaning, take
adequate precautions against dust (e.g. use a
suitable face mask).
8.7 Storage
Warning!
Pull the mains plug out of the socket and ventilate
the appliance and all connected pneumatic tools.
Switch off the compressor and make sure that it is
secured in such a way that it cannot be started up
again by any unauthorized person.
Warning!
Store the compressor only in a dry location
which is not accessible to unauthorized per-
sons. Always store upright, never tilted!
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.

8.8 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
Anl_SA_TC_AC_420_50_10_V_SPK8.indb 32
Anl_SA_TC_AC_420_50_10_V_SPK8.indb 32
GB

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
- 32 -
03.06.2019 15:24:14
03.06.2019 15:24:14

Publicidad

Tabla de contenido
loading

Tabla de contenido