Publicidad
Idiomas disponibles
Idiomas disponibles
10. Snap the blade covers into place as shown
in Fig. 3e. Ensure all cover snaps are properly
seated.
11. Pull on the blade covers to be sure they are
properly secured.
BE SURE THAT THE BLADE IS PROPERLY
SEATED ON THE PULLEYS BEFORE
STARTING THE CUT.
NOTICE: For new replacement blade, find the
compatible blade with correct size specified in
the SPECIFICATIONS.
To remove blade (Fig. 4a, 4b)
WARNING
blade to cool down and wear gloves when
removing a saw blade.
1. Remove the battery pack from the tool.
2. Remove the two blade covers from the band
saw.
3. Turn the tension lock lever located on the front
of the saw 180° CLOCKWISE. This releases
the tension on the blade for easy removal (Fig.
4a).
4. Begin removing the blade at the upper portion
of the blade guard and continue around the
pulleys (Fig. 4b). The blade may spring free
during removal. SAW BLADES ARE SHARP.
USE CARE WHEN HANDLING THEM.
5. The rubber surface of the pulleys should be
inspected for looseness or damage when
changing the blade. Wipe any chips from the
pulleys. This will extend the life of pulleys and
keep the blade from slipping.
The saw blade may be very
hot after use. Allow the
Fig. 3e
Cover Snaps
Fig. 4a
Tension Lock Lever
Fig. 4b
B
-13-
Front Handle
A
Pulleys
B
Publicidad
