Publicidad
Idiomas disponibles
Idiomas disponibles
Component instruction
1. Microphone part connector
2. Volume switch knob
3. PTT locked indicator
4. PTT button
5. Lock switch
6. Speaker
7. 3.5mm foot PTT connector
8. RJ45 8Pin net interface
9. 45CM omnidirectional Goose-neck microphone
Installation and operating instruction
1. Plug the Microphone into the port on the base.
2. Plug RJ45 into the desktop microphone and another (GP328PLUG/ KENWOOD 2-PIN/RJ45/ STANDARD
8-PIN circular) plug into the speaker/microphone on the receiver.
3. Turn on the walkie-talkie and switch the volume.
4. Turn off the radio. Please minimize the volume and turn off the radio.
5. Volume switch knob: Rotate to switch the output level on the speaker.
6. PTT locked indicator[lock]: The indicator glows red when the PTT lock switch to ON, and there is no light on a
switch to OFF.
7. PTT button: Transmit when pressing the PTT button and speak to the mic and return to receive mode when
releasing the PTT button.
8. PTT locked switch: Speak to the mic and transmit continuously (continue to transmit time is limited by external
device) when switching the button to ON, and do not press the PTT button. Switch the button to OFF to turn off
the continue transmit function and receive when pressing the PTT.
9. Foot PTT connector: Plug foot PTT into the port to use the foot PTT; step on foot PTT and speak to the mic;
release foot PTT and return to receive mode.
10. RJ45 8pin net interface: An external plug.
Distribution of plug
1. RJ45 to GP328PLUG, as defined below,
02
Publicidad
