belavi 23704-23 Manual Del Usuario página 10

Please familiarize yourself with the descriptions for each component
of the Umbrella Frame (A) below.
Fig. 3
Fig. 2
Fig. 1
STEP 2:
Place the Umbrella Frame (A) in the correct orientation as illustrated above,
with the pole placed in between the umbrella canopy, and the canopy
arm. Turn the crank handle clockwise until the line inside the canopy arm
tightens some.
Remove the bolt and cap from the connector by unscrewing the cap
counterclockwise and pulling the bolt from the eyelet, see Fig. 1.
Insert bottom portion of the canopy arm into the upper portion, see Fig. 2.
Line up eyelet of bottom portion of the canopy arm with the eyelet found
in the center of the connector.
Insert the bolt through the lined-up eyelets so that it passes through to
the other side. Place cap back onto bolt and tighten it down by turning it
clockwise, see Fig. 3.
10
Connector
Bolt
Cap
A
Canopy
Pole
Arm
Crank
Assembly Instructions
Umbrella
Canopy