BlissLights Velarus LED-RCWB Manual Del Usuario página 7

SETTING UP THE PROJECTOR
Before operating your nebula projector, please read the "Before you Begin" section and
1. Remove any protective film stickers from aperture.
2. Insert the USB power cord into a powered USB port or use the included wall adapter
to connect to an available electrical outlet. It is best practice for users to connect the
power adapter to the wall before connecting the device to the power adapter.
3. Press the power button located on the bottom of the unit. The effect will gradually
illuminate and begin moving by default.
4. Place the BlissLights® Velarus in its included base on a flat solid surface and aim toward
desired ceiling/wall.
5. Press the button again to cycle through default effects, and any custom effects created
in the BlissHome app. To pair with the BlissHome app, simply power on Velarus, and it
should appear automatically in the app.
6. To turn off the light, use the app or press the button to cycle through the effect modes
until the unit turns off completely. Remove the power plug from electrical outlet.
WIFI APP PAIRING
Velarus can be paired with our BlissHome app (availble for free from the App
Store or Google Play Store). The app allows users to control device settings from a phone
or tablet, and provides extra features such as custom nebula color modes, speed control,
and many other features. You can also set up Google Home or Alexa voice control through
the app.
"Notice" section of this user's guide.
SCAN TO DOWNLOAD APP
4