Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
To attach the battery pack:
Align the raised ribs on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE:
Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised rib
on the battery pack aligns with the groove
inside the tool and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
BLADES AND BLADE SELECTION
This band saw is designed to use .020"
(0.5 mm) thick, 1/2" (12.7 mm) wide and
32-7/8" (835 mm) long blades. DO NOT use more
than .020 (0.5 mm) thick blades.
The special .020" (0.5 mm) thickness reduces
flexure fatigue and provides maximum tooth
life. To maximize cutting life, use a blade with
the correct pitch (teeth per inch) for the specific
cutting job.
Detach the battery pack
from the tool before
ASSEMBLY
Fig. 2
Battery-
release
Button
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
WARNING
Therefore, remove the battery when the tool
is not in use or when carrying it at your side.
Blades are available in several pitches. To
select the proper blade, three factors should
be considered: The size, shape, and type of
material to be cut.
The following suggestions are for selecting the
right blade for various cutting operations. Keep
in mind that these are broad guidelines and that
blade requirements may vary depending upon
the specific size, shape and type of material to
be cut.
-10-
Attach
Detach
Battery tools are always in
operating condition.
Publicidad
