Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
WARNING!
•
Always unplug the unit from the mains socket before:
–
Assembling or disassembling ANY part.
–
Adjusting the vertical tilt.
–
Moving the unit.
–
Cleaning or storing the unit.
•
Do not touch any of the moving parts. Never insert fingers or any object into
the unit's propeller or air vents to prevent the risk of an electric shock, fire
or injury.
Before first use
•
Before first use, wipe the unit with a dry soft cloth to remove any dust.
•
Insert the new batteries (2 x AAA/LR03 batteries - supplied) into the remote control,
according to the indicated polarities (+/-).
NOTE:
Do not use rechargeable batteries in the remote control.
Assembly
Assembling the base and motor unit
This pedestal fan comes with 2 identical tubes to allow you to assemble the fan at the desired
height. Make sure the unit has been unplugged from the mains socket.
1.
Place the base on a flat, solid floor.
2.
Insert the threaded end of a tube into the hole in the middle of the base, then rotate the
tube clockwise until it is securely screwed into place. To use the fan at its maximum
height, insert the threaded end of the second tube into the first tube, then rotate it
clockwise until it is securely screwed into place.
3.
Next, insert the motor unit tube into the assembled tube and rotate it clockwise until
it is securely screwed into place.
IMPORTANT: The motor unit and its tube form an element and contain electrical
components. Do not try to disassemble them.
19
EN
Publicidad
