Publicidad
Idiomas disponibles
Idiomas disponibles
oil is low.
5. Make sure that the handles
are clean and dry. When the
pole chain saw is running,
always firmly grip the front
handle with your left hand
and the rear handle with
your right hand.
6. Do not operate the pole
chain saw in an environment
with flammable materials
such as liquids, gases or
dust. The sparks generated
by the operation of the
machine can cause an
explosion.
7. Never stand directly under
the limb you are trimming.
Always position yourself
outside the path of falling debris.
8. Always start sawing with the
moving chain running.
9. Do not saw with the tip of the
saw guide bar.
10. To protect yourself from
electrocution, do not operate
the pole chain saw within
50 ft (15 m) of overhead
wires. Failure to follow this
instruction could result in
severe personal injury.
11. The use of power
equipment can be regulated.
Remember to comply with
WWW.SENIXTOOLS.COM
legal regulations which may
differ from one location to
another.
KICKBACK
AVOID CONTACTING THE GUIDE
BAR TIP WITH ANY OBJECT.
In some cases, when the tip makes
contact with an object, it may cause
a fast reverse reaction, kicking the
guide bar up and back towards the
operator. Pinching the saw chain
along the top of the guide bar may
also push the guide bar rapidly back
towards the operator. Either of these
reactions may cause you to lose
control of the cordless pole chain
saw, which could result in serious
personal injury.
•
Kickback safety devices on
this cordless pole chain saw
include a skip chain and
a low kickback guide bar.
These will reduce, but not
entirely prevent, kickbacks.
Follow the necessary
precautions indicated in this
operator's manual to avoid
kickbacks.
•
Always use two hands when
operating the pole chain
saw, one hand gripping the
trigger and the other hand
gripping the pole. Use a firm
11 - EN
Publicidad
