Publicidad
Idiomas disponibles
Idiomas disponibles
STERILIZING - STEP 3
Bottle Ring
Bottle Cap
Nipple
Bottle
18
Place the bottle ring into the
Support Tray.
Place the bottle UPSIDE DOWN
into the Bottle Warmer Tank.
Then arrange the bottle cap, and
nipple, as shown.
Place Sterilizer Lid onto the Bottle
Warmer making sure the groove
in the BACK of the Sterilizer Lid
fits into the cutout in the Support
Tray.
Make sure bottles and
accessories do not prevent the lid
from closing correctly.
Sterilizer Lid Groove
Support Tray Cutout
STERILIZING - STEP 4
ONCE STERILIZING CYCLE IS COMPLETE
When the cycle is complete, a long audible beep will be heard and the
Warmer will turn off automatically.
Always clean your hands thoroughly before touching the sanitized
objects. Sanitized items will remain sterile inside the Warmer with the
lid on for about 24 hours. If there is a power outage during use of the
Sterilizer the cycle must be restarted.
Allow the Warmer to cool completely before starting a new cycle. If
complete, allow to cool then remove the plug from the wall outlet,
pour out the water, and dry thoroughly before storing in a cool dry
place.
Touch the STERILIZE button. The
icon will stop flashing to confirm
your selection.
Then touch the START/STOP
button to begin the cycle. The
TIMER will show you the time
remaining in the sterilization
cycle.
19
Publicidad
