Emos P5630S Manual De Instrucciones página 9

GB | Thermostatic Radiator Valve
Specifications
Temperature control range: 5 °C – 35 °C, 0.5 °C resolution
Range of displayed temperature: 1 °C – 70 °C, 0.5 °C resolution
Power supply: 2× 1.5 V AA
Maximum current draw: 90 mA
Maximum valve lift: 4.5 mm
Mounting dimensions of the head: M30 × 1.5
Operating temperature: -10 °C to 60 °C
Installation
1. The head is designed for all types of commonly available radiator valves
without the need to interrupt heat circulation. If the thermostatic head is
not compatible, proceed in accordance with information provided in the
Compatibility section.
2. Place batteries into the head before installing. Remove the old thermostatic
head by loosening the nut on the radiator head. Fit the head on the front and
manually tighten the nut.
Note:
• The head support must connect in the middle to the support on the head.
• The head must not be compressed or wedged.
• Make sure the screen is visible and legible in the mounted position.
Compatibility (see fig. A)
The head may not be compatible with certain radiator heads.
Please compare your head with information provided by the manufacturer and
use a suitable adapter if needed.
Enclosed adapters: Danfoss RA, RAV, RAVL
Mount the adapter onto the head and turn it until it clicks in place.
Fasten the adapter with a screw, if the adapter is designed for it.
9