Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling the product
After the LED module (6) has been
fully charged and the air cushion (2)
has been sufficiently filled with air,
you can bring the two parts together
to be able to use the RGB LED out-
door stool (1) to its full extent.
1. Place the air cushion (2) on its upper side so that the air cushion opening (3) faces upwards.
2. Take the LED module (6) and insert it into the air cushion opening (3) with a little pressure and a slight
clockwise rotation. The LED module (6) will then snap into place and sit firmly in the air cushion (2).
3. Turn the RGB LED outdoor stool (1) over so that the velvet surface (4) is facing upwards and place it on
a horizontal and sufficiently stable surface.
The RGB LED outdoor stool (1) is now fully assembled and can be used as intended.
Switching the product on/off
• To switch the product on, press and hold the on/off switch (8) on the bottom side of the product for approx.
2 seconds.
• To switch the product off, press and hold the on/off switch (8) on the bottom side of the product again for
approx. 2 seconds.
REMOTE CONTROL
You can use the remote control (10) to control the various functions of the LED module (6).
Functional description of the buttons
Button
Function
Switching on LED lighting
Switching off LED lighting
Switch on/off playback of different luminous
colours
Switch through luminous colours
Switching the LED illumination on/off manually
• To switch on the LED illumination, press the ON button (11) once.
• To switch the LED illumination off again, press the OFF button (12) once.
Setting the luminous colour manually
You can select the light colour of the LED lighting manually. To do this, proceed as follows:
• Switch on the product as described above.
• Press the COLOR button (14) once or several times until the LED module (6) lights up in the desired colour.
• The light colours are always selected in the same order: warm white - red - dark green - blue - light green -
yellow - pink – purple.
After switching on, the product always lights up in the warm white colour.
To change the light colour directly back to warm white, press the WHITE button (18) once.
Button
Function
Change brightness
Switch flickering effect on or off
Change the playback speed of the luminous
colours
Set the luminous colour to warm white
13
USER GUIDE
Publicidad
