Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Low or No Output Voltage
Red LED on
TV Interference
Low Battery Alarm on ALL the
time
Appliance not functioning
All manuals and user guides at all-guides.com
Trouble Shooting
Reason
Battery voltage may be
low.
Poor contacts are
causing voltage drop.
Using incorrect type of
voltmeter to test output
voltage.
Battery voltage below
10 volts.
AC appliance
consumption is higher
than specified.
Inverter is too hot
causing thermal
overload.
Inverter may be
defective
Electrical interference
from the inverter
TV signal is too weak
Input voltage below 10
volts
Poor contacts are
causing voltage drop.
Appliance won't turn on
Solution
Recharge or
replace battery.
May be necessary
to use two batteries
to run some items.
Unplug and
reattach
connections, may
be necessary to use
shorter or heavier
cables. Check
condition of 12 volt
plug and socket,
clean or replace as
necessary.
Use a true RMS
reading meter.
Recharge or
replace battery.
Use a higher
capacity inverter or
lower capacity
appliance.
Shut off inverter to
allow cooling.
Ensure proper
ventilation.
Contact tech
hotline.
Use a filter in the
TV power cord
Adjust placement of
the television.
Try another TV,
different makes and
models may not
experience the
same interference.
Recharge or
replace battery.
May be necessary
to use two batteries
to run some items.
Unplug and
reattach
connections, may
be necessary to use
shorter or heavier
cables. Check
condition of 12 volt
plug and socket,
clean or replace as
necessary.
Turn inverter ON,
OFF, then ON
Publicidad
