Descargar Imprimir esta página

Smartwares UK 8 B1 Instrucciones De Montaje, De Uso Y De Seguridad página 26

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 75
Do not use the camera in explosion risk areas, e.g. petrol stations
or in dusty areas.
Observe applicable national laws if you intend to use this camera
to photograph or watch people.
Do not place any liquid-filled containers such as vases or drinks on
or near the device. Shield the power supply from drips or sprays.
Keep away from open flames. For example, do not place any
burning candles on or near the device. That way you can avoid
the spread of fire.
Installing the camera
Tip: If you are attaching the camera to the wall, we recommend
mounting the camera on a mounting bracket. That way you can more
easily align the camera later.
Note: Mount the camera in a height and position at which you can-
not reach it without aid. The same applies to the connector cable.
Note: The camera is not suitable for ceiling suspension as the image
cannot be shown rotated.
Be sure not to pierce electrical lines or other obstructions during
installation.
Before attaching the product to the wall, check which mounting
materials are suitable for your wall.
Hold the camera
position and mark the drill holes on the wall with the help of the
pre-drilled holes
CAUTION! RISK OF INJURY! Please refer to your electric
drill's instructions for use.
Now drill the mounting holes (Ø 6 mm). Ensure that you do not
damage the supply line.
26 GB/IE
against the wall in the desired mounting
1
.
2

Publicidad

loading