Ego Power+ LT1000E Manual Del Usuario página 5

SPECIFICATIONS
Voltage
56 V
Brightness level: Level 1: 600 lm, 36 h
Luminous Flux/Brightness Level 2: 1,600 lm, 16 h
(4 panels combined) & Level 3: 3,200 lm, 8 h
Approximate run time Level 4: 4,800 lm, 5 h
(4 panels with EGO 56V Level 5: 6,400 lm, 4 h
5.0 Ah Battery) Boost: 10,000 lm, 3 h*
Weight (without battery
4.3 kg
pack)
*The light will illuminate at 10,000 lm in ambient
temperature 25°C for about 1 hour and will run for 2 more
hours in brightness level 5. Please note that the 1 hour
run time is entirely dependent on ambient temperature. In
a cooler environment the "BOOST" mode (10,000 lm) will
have longer run time, but in a very hot environment the
"BOOST" mode (10,000 lm) will have a shorter run time.
DESCRIPTION
KNOW YOUR PORTABLE AREA LIGHT (Fig. A1)
1. Battery Ejection Mechanism
2. Latch
3. Battery-Release Button
4. Main Handle
5. Lock-Knob
6. Base
7. Side Panels
8. Top Handle
9. Upper Panel
10. Lower Panel
11. Lens (Transparent Cover) on each panel
12. Brightness Adjustment Button
13. Panel Selection Button
14. Power Button
15. USB Port
16. Hooks
17. Tripod Mounting Holes
PACKING LIST (FIG. A1)
OPERATION
WARNING:
Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.
Before each use, inspect the entire product for damaged,
missing, or loose parts, such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced.
APPLICATION
You may use this product for flood lighting, area lighting
and emergency lighting.
PIVOTING THE LIGHT PANELS (Fig. B)
1. Unfold the side panels and turn the lock-knob
counterclockwise to release the upper panel.
2. Rotate the lock-knob clockwise to secure the upper
panel to desired angle and pivot the side panels to
desired angles.
ATTACHING/DETACHING THE BATTERY PACK (Fig. C)
Use only with EGO's battery packs and chargers listed in
Fig. A2.
Fully charge before first use.
To attach
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a "click".
To detach
Depress the battery-release button and pull the battery
pack out.
C1-1 Battery Rib
C1-3 Battery-Release Button
OPERATING THE CONTROL INTERFACE (Fig. D)
D1-1 Power Button
D1-3 Panel Selection Button D1-4 USB Port
NOTICE:
the last active panel selection and reverts to its upon
restart. However, the brightness setting always resets to
the default lowest brightness level 1 (600lm).
Power button
Press the power button briefly to turn the light ON.
Press the power button briefly again to turn the light OFF.
56 VOLT LITHIUM-ION CORDLESS PORTABLE AREA LIGHT-LT1000E
C1-2 Mounting Slot
Brightness
D1-2
Adjustment Button
When the area light is turned on, it remembers
EN
5