Schwaiger 658057 Manual De Instrucciones página 19

USB
You can use the USB port
1. If necessary, remove the protective cap and insert the USB storage medium into the USB port
product.
2. Press the SOURCE
9
3. Playback automatically starts with the first track on the USB storage medium.
You can pause or resume audio playback at any time by pressing the PLAY/PAUSE
Please observe the following notes on the USB memory that can be used:
• Due to the numerous different file systems and file formats, the function of connected storage media cannot be gua-
ranteed.
• Depending on the available data volume of the storage medium, it may take longer until the system is recognized by
the product.
• USB memory devices with a storage capacity of up to max. 32 GB are supported.
• Supported file systems are FAT16 and FAT32; the supported file format is MP3.
• External hard disks are not supported.
• USB extension cables are supported.
Additional playback functions in USB mode
After inserting an USB storage medium into the USB port
automatically in numerical order.
In USB mode, the following playback functions are also available:
Fast forward / rewind
Press and hold the PREVIOUS TRACK
perform a fast forward. Release the respective key at the desired point of the title to continue playback from there on.
Repeat functions
• During playback, press and hold the PLAY/PAUSE
the current title permanently.
• Press and hold the PLAY/PAUSE
permanently.
• Press and hold the PLAY/PAUSE
the repeat function again.
Connect device via Bluetooth
The Bluetooth function enables wireless reception of audio signals from an external, Bluetooth
®
device. Make sure that the distance between the two devices does not exceed 10 meters.
Only one Bluetooth device can be paired with the product at a time.
®
To output the sound of your Bluetooth
devices must first be connected to each other. To do this, proceed as follows:
1. Switch on the product as described above.
2. Press the SOURCE
9
3. The text BT is shown in the display
4. The product automatically tries to connect to the last audio output device paired via Bluetooth
the product remains on search mode.
5. Turn on the Bluetooth
the two devices. You can find more information about this in the operating instructions of your external player.
6. After searching, the product „Schwaiger PSS-400" should also be listed in the list of devices found.
7. Select „Schwaiger PSS-400" and pair the two devices with each other.
8. If a password is required, enter the code „0000".
9. The pairing of the two devices is completed as soon as a signal tone sounds from the speaker.
10. To disconnect the Bluetooth connection, press and hold the PLAY/PAUSE
press the SOURCE
9
mode again using the SOURCE
You can now start audio playback either on your external player/smartphone or by pressing the PLAY/PAUSE
on the product.
When transmitting signals via Bluetooth
In this case, use the control options on your external device.
It is also recommended that you set the volume on your audio output device to the maximum level and fine-tune
the volume on the product.
You can use the tablet/smartphone tray
to connect USB storage devices (e.g., USB sticks) to the product for audio playback.
6
key repeatedly until the text USB appears in the display
key to perform a fast rewind within a title. Use the NEXT TRACK
14
key again until the display
13
key again until the text OFF REPEAT appears in the display
13
®
-enabled external player (e.g., smartphone) wirelessly via the product, the two
®
key several times to switch to Bluetooth
and the product is on search mode.
21
function of your player and let your player/smartphone search for Bluetooth
®
key to switch to another playback mode. To re-establish the connection, switch to Bluetooth
key or select „Schwaiger PSS-400" again in the list of your external player.
9
, not all operating functions may be available via the keys on the product.
®
on top of the product to safely store your external device during playback.
4
on the product, playback of the tracks stored on it starts
6
key until the display
13
shows the text ALL REPEAT to repeat all tracks
21
mode or press the BLUETOOTH
®
19
USER GUIDE
6
.
21
key on the product.
13
shows the text ONE REPEAT to repeat
21
-enabled audio output
®
16
. If this is not possible,
®
key until you hear an audio signal or
13
on the top of the
key to
15
to deactivate
21
key once.
devices to pair
®
button
13