USER GUIDE
Radio operation
To be able to receive radio stations via FM, a FM antenna
installed and cannot be removed from the product.
• Unroll the pigtail antenna completely so that the largest possible reception area is available.
• For the best possible radio reception, make sure that the antenna is not covered.
Press the SOURCE
key several times to switch to radio mode. The display
9
set frequency.
Set station
To tune in a radio station manually, proceed as follows:
1. Press the PLAY/PAUSE
2. Press one of the keys PREVIOUS TRACK
Save station
The product can start an automatic scan and search for all stations available in the reception area. During an automatic
search, the product continuously saves all the programs which can be found without limiting the number of channels.
• Press and hold the PLAY/PAUSE
• All stations found are now automatically saved in sequence and assigned to a program position.
• Press the PLAY/PAUSE
• After the search is completed, the product plays the station stored in program position P01.
Call up station
To call up an automatically stored station, press the PLAY/PAUSE
P01) is shown on the display
times to select the desired program position and play the station stored there. The display
program position (e.g., P01).
Connect microphone
You have the option of connecting a microphone to one of the product's 6.3 mm jack sockets. A suitable microphone
already included in the scope of delivery.
Microphones can be used in any operating mode. It is recommended to always connect a microphone to the mi-
crophone input. If the microphone is connected to the guitar input, the microphone echo sound effects are not
available.
To connect the microphone, proceed as follows:
1. Switch off the product as described above.
2. Connect the microphone to the MIC IN input
3. Switch on the product as described above.
4. Slide the MIC ON/OFF
5. Turn the MIC VOLUME knob
the microphone volume.
6. Press the MIC ECHO
in the display
. Press the MIC ECHO
21
in the display
.
21
7. Press the MIC ECHO
8. After use, slide the MIC ON/OFF
phone off.
key so that the first available frequency is shown in the display
13
14
key until the automatic station search starts.
13
key again to stop the automatic saving process.
13
. Then press the PREVIOUS TRACK
21
switch on the supplied microphone
27
in the direction + to increase the microphone volume or in the direction - to decrease
18
key to activate an echo sound effect for the connected microphone. The text ECHO1 appears
11
key again to select the second echo sound effect. The text ECHO2 appears
11
key again to deactivate the echo sound effect for the connected microphone.
11
switch of the supplied microphone
27
is connected to the product. This antenna is permanently
23
or NEXT TRACK
repeatedly to manually set a specific frequency.
15
key once so that a stored program position (e.g.,
13
14
or to the GUITAR IN input
19
to the position ON to turn the microphone on.
3
20
shows the text FM and the currently
21
21
key or NEXT TRACK
15
shows the respective
21
on top of the product.
20
to the position OFF to turn the micro-
3
.
key once or several
is
3