HEALTH AND SAFETY
• Danger of electrical shock! Never touch the power plug with wet hands, especially when
inserting or removing the plug.
• Danger of electrical shock! If the unit falls into water, unplug it immediately; do not reach
into the water. Send to Henry Schein® Handpiece & Small Equipment Solutions for evalua-
tion and repair.
• Never allow power cord to be pulled, twisted or severely bent. Never operate unit if cord,
power plug, or housing is damaged or loose.
• Never block the vents on the device. Keep the vents free from lint, hair and other materials.
• Keep unit away from excessive heat sources.
• To avoid risk of electrical shock, equipment damage or fire during an electrical storm, turn
machine off and do not touch machine or cord.
GENERAL OPERATIONS/PRECAUTIONS
• Do not turn on the unit without water in the tank. Dry running over 30 seconds will
damage the unit or severely reduce the life of the unit.
• Do not place instruments directly on the base of the tank. Placing instruments directly
on the base of the tank will result in damage to the unit. Place instruments into the basket
for proper use.
• Do not run the unit without the lid on. The lid helps reduce aerosols and reduce noise.
• Avoid cleaning burs and files in the main tank directly otherwise they may get into the
drainage valve and cause damage. Use a beaker or cleaning chamber. See accessories.
• Do not fill the tank above the Max line to avoid overspill.
• Do not use solution containing abrasive substances or strong corrosive chemical solution
not recommended by the manufacturer or the supplier.
• Do not run the unit for an extended time or continuously. If the unit has been running for 30
minutes, it is recommended to stop the unit for about 10 minutes.
• Place the device on a dry and flat surface for operation.
• If any abnormalities are found, stop using immediately and contact Henry Schein® Hand-
piece & Small Equipment Solutions.
• This device should only be operated by a professional.
• Never operate the device unattended.
• Disconnect the power cord from the unit before cleaning the device.
• Never disassemble the unit. All servicing of this unit is to be conducted by a qualified
service personnel.
Maxima PowerClean 210 - 2