DGT 2500 Manual De Instrucciones página 4

In this mode you can switch the lever freely, but not change any other settings.
Pressing the left arrow button will show the settings details. More information on setting the
chess clock is given under the heading
When you have found the timing option you wish to use, press the play/pause or right arrow
button to select it.
Wait for start
After selecting an option, the clock enters
the start of a match. Now some final adjustments can still be made:
The position of the lever can still be changed to indicate the correct starting
side/ white side.
The freeze function can be turned on or off by holding the right arrow button.
The sound function can be turned on or off by holding the minus button.
The
button.
If you want to check if the chosen time control/ option is correct, you can also press the left
arrow to show the setting details.
When all settings are correct, press the play/pause button to start the clock.
Time running mode
When the clock has been started, it will start counting down on the side where the lever is up.
When a player has finished their turn, they must push the lever down. When this happens, the
other side has the lever up and their clock starts counting down. This will continue until either
side has reached zero.
When the clock is running, pressing buttons has no effect except when the plus button is
pressed and the move counter screen is shown. This can be done with or without
move counter"
When the time is running the option and period numbers will be hidden. If the sound, freeze
and/or "Forced move counter"
4
DGT2500 Manual
"Forced move counter"
Figure 3. Time Running mode
active.
are activated, the corresponding symbol will remain visible.
"Setting details"
of this section.
"Wait for start" mode. This is the
can be turned on or off by holding the left arrow
"Pause" before
"Forced