VERANDA CLASSICS FG-VGO7CHDS Instrucciones página 3

1. Loosely attach Bottom Shelf (G) to the Left Side Panel (B) and the Right Side Panel (C) by bolts (N) through
lock washers (M), flat washers (L), using Allen wrench (P). See figure 1.
DO NOT TIGHTEN BOLTS AT THIS POINTS.
N
M
L
Hardware Used:
L Flat Washer (φ 6.5)
M Lock Washer (φ 6.5)
N Bolt (1/4" x 25mm)
P Allen Wrench
2. Turn the table to the upright position, loosely attach Top Shelf (F) to the Left Side Panel (B) and the Right
Side Panel (C) by bolts (N) through lock washers (M), flat washers (L), using Allen wrench (P). See figure 2.
DO NOT TIGHTEN BOLTS AT THIS POINTS.
L M N
80% force
Hardware Used:
L Flat Washer (φ 6.5)
M Lock Washer (φ 6.5)
N Bolt (1/4" x 25mm)
P Allen Wrench
ASSEMBLY INSTRUCTIONS
80% force
P
B
x 4
x 4
x 4
x 1
P
B
x 4
x 4
x 4
x 1
F
G
C
Figure 1
C
Figure 2
3