VERANDA CLASSICS FG-VGO7CHDS Instrucciones página 4

3. Turn the table to the back, loosely attach Back Panel (D) to the Left Side Panel (B) and the Right Side Panel
(C) by bolts (N) through lock washers (M), flat washers (L), using Allen wrench (P). See figure 3.
DO NOT TIGHTEN BOLTS AT THIS POINTS.
L M
N
80% force
Hardware Used:
L Flat Washer (φ 6.5)
M Lock Washer (φ 6.5)
N Bolt (1/4" x 25mm)
P Allen Wrench
4. Turn the table to the front position, loosely attach Door (F) to the Left Side Panel (B) and the Right
Side Panel (C) by bolts (N) through lock washers (M), flat washers (L), using Allen wrench (P). See figure 4.
Once all the bolts are in place. Securely tighten all the bolts (N) with Allen wrench (P). Base fully assembled.
N
M
L
Hardware Used:
L Flat Washer (φ 6.5)
M Lock Washer (φ 6.5)
N Bolt (1/4" x 25mm) x 4
P Allen Wrench
ASSEMBLY INSTRUCTIONS
P
C
x 4
x 4
x 4
x 1
100% force
P
B
x 4
x 4
x 1
D
F
B
Figure 3
D
C
Figure 4
4