LORGAR Noah 501 Manual De Instrucciones página 4

EN
– volume control wheel;
①
– USB Type-C connector;
⑤
Purpose: the Lorgar Noah 501 wireless headset is designed to play audio from computers,
gaming and mobile devices with BT and voice calls functions.
Design features: 195×185×80 mm; ABS plastic, polyurethane; retractable microphone,
volume control.
Functional features. Connection: BT (5.3, up to 10 m, 10 dBm, 0.01 W), 3.5 mm AUX cable.
Battery: non-removable, lithium polymer, 1000 mAh (power supply output: 5 V / 1 A DC);
≥300 recharge cycles; full charge: 2 hours. Autonomous work: up to 58 hours. Standby mode:
up to 200 hours. Microphone: omnidirectional, (−42 ± 3) dB. Speakers: 40 mm, (123 ± 3) dB,
20–20000 Hz, 32 Ohms. Operating and storage conditions: temperature +10...+45 °C,
relative humidity 45–85 % (non-condensing).
Accessories: Headset LRG-GHS501, USB Type-C Cable (0.8 m), AUX cable 3.5 mm
(1.5 m), quick start guide.
Before using the headset, set the minimum volume on your device * to avoid hearing damage.
Do not use the headset while driving a vehicle. Do not expose to high temperatures (from
heaters or direct sunlight) or high humidity. Avoid dust or liquids. Clean only after
disconnecting from the power supply and with a dry or slightly damp cloth only. Do not use
any detergents or cleaning agents. Don't let it fall from a height. Do not disassemble or repair
the headset by yourself. If there are any malfunctions, please contact the service center.
1. Charging. Before the first use, fully charge the battery (see Fig. B on p. 2). While charging,
the LED indicator
stops charging.
2. Turning on. Press and hold the button
and blue. When wired, the headset works without turning on (see fig. C on p. 3).
3. Pairing. Turn on BT on your device *, locate and select "Lorgar Noah 501" for pairing. To
delete the pairing information, hold down the buttons
4. Turning off. Press and hold the button
and go off.
5. Other features of the buttons: see Fig. D on p. 3.
The warranty period begins on the date of purchase from an authorized Lorgar retailer. To
obtain warranty service, visit the point of purchase, presenting the device and proof of
payment. The warranty is 2 years, unless otherwise specified by local law. The service life is
2 years. More information about use and warranty is available at lorgar.eu/warranty-terms.
We hereby reserve the right to change the information contained herein without noticing the
end users. Please find up-to-date information and a detailed description hereof, connection
and operation steps, certificates, warranty conditions in the complete user manual at
lorgar.eu/drivers-and-manuals. Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios
Athanasios, 4101 Limassol, Cyprus. Made in China. All trademarks and brand names are the
property of their respective owners.
4
EXTERIOR (see fig. A on p. 2)
– mute button;
②
– 3.5 mm AUX connector;
⑥
SPECIFICATIONS
SAFE USE GUIDELINES
GETTING STARTED
lights red; when fully charged, it goes off and the headset
③
WARRANTY SERVICE
FURTHER INFORMATION.
* Device means a computer, a laptop, a tablet, a smart TV, etc.
– LED indicator;
③
for 3 seconds until the LED indicator
④
and
④
for 2 seconds, the LED indicator
④
– multifunction button;
④
– microphone.
⑦
simultaneously for 3 seconds.
②
flashes red
③
will light red
③