Connect The Ph Electrodes; Display And Icons; Turn On The Meter - OHAUS STARTER 5000 Manual De Instrucciones

STARTER 5000 Bench pH Meter
2.4

Connect the pH electrodes

There are 2 sockets for the electrode. "pH" socket (BNC); "TEMP." Socket (Cinch).
For ST350 3-in-1 electrode, connect both the BNC and Cinch socket. For 2-in-1 pH electrodes
(e.g. ST230), only connect the BNC.
3

DISPLAY AND ICONS

3.1

Turn on the meter

STARTER 5000 is a color touch screen 0.001pH bench meter. It does not have any buttons.
After connecting with power, the meter will turn on, if meter in screen protection, you can tap the
screen to turn on the screen.
Note: If customer did not operate the meter for more than 6 hours, the meter will completely shut
off automatically. You cannot turn on the meter by tapping the screen any more. You need to
reconnect power to turn on the meter.
Select the language and then press
Main Interface
to enter the main interface.
EN-5