Porsche Mini LED Lamp Manual De Instrucciones página 13

Original operating instructions
PRODUCT DESCRIPTION
DE
EN 1. TOP-LED
2. Integrated magnet
ES
3. On/o button
4. COB LED 1
FR
5. Swivel joint
IT
FIRST USE
NL
Switch on the light by pressing the On/O button.
SE
1x TOP-LED
2x COB-LED 1 (50%)
PT
RU
NOTICE Charging process:
KR
Charge fully before rst use. Likewise, when storing over an
extended period of time, charge beforehand (and at least 2x per
CN
year during storage) in order to prevent the rechargeable battery
pack deep-discharging. To do so, pull the sealing cap out of the
JP
charge socket and plug in the charge plug. Then connect the
charging cable to the USB charging port.
AR
13
6. LED display
7. Type-C charge socket
8. Integrated magnets
9. Belt clip
10. COB LED 2
3x COB-LED 1 (100%)
4x COB-LED 2 (100%)
Charge only when switched o .
Do not charge and use the light at the same time!
LED rechargeable battery indicator via status LED:
LED display:
Charging process: Green LED ashes
2
Rechargeable battery fully charged: Green LED illuminates
2
Red: Charge battery immediately
2
Rechargeable battery capacity warning:
Light ickers once 3x in succession.
If switched on again without charging it ickers again.
Recharge immediately a er this.
CAUTION Holding devices (magnet):
When using the holding device (magnet), ensure that the holding
device is rmly/properly fastened in place in order to avoid
possible damage due to the lamp falling.
Mini LED lamp