universalblue UCTSHAPE60-19 Manual De Instrucciones página 34

Glass hood should be cleaned regularly (eg weekly) to ensure a long
service life. Dry with a soft and clean cloth. A neutral liquid
detergent can be used.
The filters can be cleaned by hand. Soak them for about 3 minutes
in water with a detergent that releases grease and then rub it gently
with a soft brush. Do not apply too much pressure, avoid damaging
it. (Allow it to dry naturally out of direct sunlight).If you wish, filters
can also be cleaned in the dishwasher if the water reach 60º as
maximum temperature.
The filters should be washed separately and should not be mixed
with crockery and other kitchen utensils.
To remove aluminum filters, please do it as below:
 Press the button allocated in the filter.
 Pull the filter back and down gently.
 Repeat the operation in reverse to install the filters again.
34