Teac TN-300 Manual Del Usuario página 16

7 Lift the cue lever.
o You can also leave the cue lever down and move
the raised tone arm over the record and then
lower the tone arm slowly to start playback.
8 Move the tone arm to the edge of the
record or the track where you want to
start playback.
9 Lower the cue lever.
Lower the tone arm slowly until the stylus touches
the record and playback begins.
o We recommend that you close the turntable
cover during record playback to avoid dust.
V Do not place anything on the turntable cover.
Objects on the cover might cause noise due
to vibrations or fall off, especially during
playback.
CAUTION
o During playback, do not touch the tone arm or the
rotating record.
o Do not stop turntable rotation during playback.
During record playback, feedback could occur if
the volume is too loud. If this happens, lower the
volume of the amplifier.
16
Basic operation (continued)
Cue lever
Tone arm
When playback finishes
1 Slightly lift the cue lever or the head-
shell hook and return the tone arm to
its resting position.
2
Turn the START/STOP rotation knob to
STOP to stop the turntable.
o When the turntable stops, the blue LED will also
become unlit.
Cue lever
Tone arm