Descargar Imprimir esta página

Husqvarna LB 144i Manual De Usuario página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 106
Do not clean the battery or the battery charger with
To clean the battery and the battery
water. Refer to
charger on page 16 .
Do not use a defective or damaged battery.
Keep batteries in storage away from metal objects
such as nails, coins, jewellery.
Battery charger safety
WARNING:
instructions that follow before you use the
product.
Use the QC battery chargers to charge Husqvarna
replacement batteries only.
Risk of electrical shock or short circuit. Do not put
objects into the air slots of the charger. Do not try to
disassemble the battery charger. Do not connect the
charger terminals to metal objects. Use an approved
mains socket.
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
Regularly make sure that the power cord of the
battery charger is not damaged and that there are
no cracks in it.
Do not lift the battery charger by the power cord. To
disconnect the battery charger from a mains socket,
pull out the plug. Do not pull the power cord.
Keep the power cord and extension cables away
from water, oil and sharp edges. Make sure that the
cable is not pinched in doors, fences or equivalent. It
can cause the charger to become energized.
Do not clean the battery charger with water.
The battery charger can be used by children aged
from 8 years and above and persons with reduced
physical, sensory, or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the battery charger in a safe way and understand
the hazards involved. Children shall not play with
the battery charger. Cleaning and user maintenance
shall not be made by children without supervision.
Do not charge non-rechargeable batteries in the
battery charger.
Introduction
WARNING:
product, read the safety chapter.
12
Read the warning
Assembly
Before you assemble the
Do not use the battery charger near flammable
materials or materials that can cause corrosion. Do
not cover the battery charger. Pull out the plug to the
battery charger if there is smoke or fire.
Do not use a defective or damaged battery charger.
Only charge the battery indoors in a room with good
airflow and away from sunlight. Do not charge the
battery in wet conditions.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
To prevent accidental start during maintenance,
turn the safety key to 0 and remove the battery.
Wait at minimum 5 seconds before you start the
maintenance.
Only do the maintenance work written in this
operator's manual. More extensive work and
professional repairs must be done by an approved
service agent. Speak to your nearest service agent
for more information.
Do the maintenance work correctly to increase the
lifetime of the product and decrease the risk of
accidents.
Replace damaged, worn or broken parts. Always use
original spare parts from the manufacturer. Other
spare parts can cause damage to the product and
increase the risk of accidents.
To prevent injury, do not remove or do modifications
to safety devices.
Put on heavy duty gloves when you use the cutting
equipment. The blade is very sharp and cuts can
easily occur.
Keep the cutting edges sharp and clean for the best
and safest performance.
Let your service agent regularly examine the product
and make necessary adjustments and repairs.
Obey the instructions for how to change accessories.
Only use accessories from the manufacturer.
When not in operation, keep the product, battery and
battery charger apart in a dry, indoor and locked
area. Make sure that children and persons that are
not approved cannot get access to the product,
battery or battery charger.
WARNING:
during assembly, turn the safety key to 0,
remove the battery and wait at minimum 5
seconds.
Read the warning
To prevent accidental start
1869 - 003 - 04.11.2022

Publicidad

loading