Publicidad
Idiomas disponibles
Idiomas disponibles
CVS-MW1-4Y IB-080421-FINAL.qxp_MLU3AC1-JAN05-2 8/9/21 12:58 PM Page 20
5.5. Memory: reviewing readings
At the end of a measurement, this monitor automatically stores
each result with date and time. This unit stores 120 memories
for each of 2 users.
Viewing the stored values
With the unit off, press the "M" button. The display first shows
"A," then shows an average of all measurements stored in the
unit. Please note: Measurements for each user are averaged and
stored separately. Be certain that you are viewing the measure-
ments for the correct user.
Pressing the "M" button again displays the previous value. To
view a particular stored memory, press and hold the "M" button
to scroll to that stored reading.
Memory full
When the memory has stored 120 results, a new, measured
value is stored by overwriting the oldest value.
Clear all values
If you are sure that you want to permanently remove all stored
values, hold down the "M" button (the instrument must have
been switched off beforehand) until "CL" appears and then
release the button. If you do not want to clear the values, press
the START/STOP button. To permanently clear the memory, press
the "M" button while "CL" is flashing.
Individual values cannot be cleared.
1
20
Publicidad
