Descargar Imprimir esta página

Farfisa SE4252 Manual Del Usuario página 15

Ocultar thumbs Ver también para SE4252:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
To start a conversation, for around 90 seconds,
press the button
, to end the conversation
before the conversation time expires press
button
again.
In case of a call to a user with more than
one videointercom in parallel in the same
apartment, all the videointercoms will ring, but
only the videointercom with room number 0
will turn ON. To answer from this videointercom
follow the instructions above. It is also possible
to answer from any other videointercom of the
apartment by pressing on it button
videointercom will turn ON and at the same
time the intercom that had been turned ON
before, switches OFF. If, after having seen the
image, you wish to talk with the calling door
station, press again the button
To operate the electric door lock release press
the button
; this command operates even
if any call hasn't been received. The command
will operate the electric lock release of the last
door station which has made a call.
During a conversation, pressing for long time
button "1" (>3 seconds), the Adjustment menu
will be displayed and it is possible to adjust
the audio level and the image quality (refer to
paragraph "Audio-video Adjustments").
Pressing for a long time button "4" (>3 seconds)
the list of the devices which can be enabled
during the conversation is displayed; to enable
a specific device select it using buttons
and press
. In the devices list there are also
A n n u l l a
S a l v a
N o n s a l v a r e
2 system functions:
- Camera
- Mute
- "Camera" function allows to switch the
image among additional cameras connected
to the door station; to switch the images it is
necessary to select "Camera" using buttons
and confirm with
, each time button
A n n u l l a
A n n u l l a
A n n u l l a
S a l v a
N o n s a l v a r e
S a l v a
N o n s a l v a r e
S a l v a
N o n s a l v a r e
is pressed, the image switches from one
A n n u l l a
S a l v a
N o n s a l v a r e
camera to another; if there aren't additional
cameras in the system, pressing button
the screen always displays the image from
the door station.
- "Mute" function allows to disable audio
towards the door station (no audio to the
door station, but audio from the door station).
To enable the "Mute" function during a
conversation it is required to select it using
buttons
and confirm by
A n n u l l a
A n n u l l a
S a l v a
S a l v a
N o n s a l v a r e
N o n s a l v a r e
function will be activated and it becomes
green. Press again button
between "Unmute" and "Mute".
Press button
to exit the devices list.
A n n u l l a
S a l v a
N o n s a l v a r e
Monitor function and connection with one
or more external door stations.
With the system in stand-by and no any
conversation in progress, it is possible to
monitor the external door stations by pressing
the button
on the videointercom. If the
installation includes more external door
stations to monitor them selectively it is
possible to use button "1", 2", 3" and "4" if
properly programmed. To program buttons
refer to "Programming" . The monitor function
lasts about 30 seconds, but will be interrupted
in case of a call from an external door station.
Monitor function can be executed also selecting
the entrance to monitor from the "Users and
devices" list:
- press for a long time button "4" (>3 seconds),
the list of pre-stored door stations will be
displayed on the videointercom screen
- with buttons
monitor
- press button
showing the image from that entrance.
In the "Users and devices" list it is available
the function "Camera" which allows to show
the images coming from additional cameras
connected to a door station; for operating mode
refer to the paragraph "Call from door station"
, this
If pressing the button
selecting the door station from the list "Users
and devices") the videointercom remains
switched OFF and a busy tone is heard, the
.
system is busy and it is necessary to wait until
the system becomes free.
Making or receiving a call from another
user or from another device in the same
apartment.
When the installation is in stand-by, you can
make an intercommunicating call to another
user or to another device in the same apartment;
you must have stored the names and address
of the desired users and devices in the "Users
and devices" list (refer to Programming - "Users
and devices").
The first 4 users of the list can be directly called
pressing buttons "1", "2", "3" e "4", if there are
A n n u l l a
A n n u l l a
S a l v a
S a l v a
N o n s a l v a r e
N o n s a l v a r e
more than 4 users, it is necessary to press for a
long time button 4 (>3 seconds), on the screen
appears the complete list of stored users and
devices; to make a call select with buttons
the desired user and press
A n n u l l a
S a l v a
N o n s a l v a r e
will appear the name of the called user and
you get the calling tone.
If you get a busy tone, wait until the system
becomes free and try again.
The videointercom of the other user will ring
(without switching-ON) with the programmed
melody. If the called user answers within 30
A n n u l l a
S a l v a
N o n s a l v a r e
seconds, a 90-second conversation starts,
otherwise the system goes back to free.
The internal conversation will be automatically
interrupted in case of call from external door
station to any other user.
Turn OFF the ringtone.
, "Mute"
Ringing Melodies can be switched OFF pressing
A n n u l l a
S a l v a
N o n s a l v a r e
for a long time button
to toggle
flashes to indicate that Ringing Melodies
A n n u l l a
S a l v a
N o n s a l v a r e
have been switched OFF and continue flashing
until Ringing Melodies will be switched ON
pressing again for a long time button
(>3 seconds).
Door open warning.
In systems properly designed, it is possible
to get on the videointercom a warning signal
according to the state of the entry door (open/
closed); when entry door is open icon
flash.
select the door station to
A n n u l l a
A n n u l l a
S a l v a
N o n s a l v a r e
N o n s a l v a r e
S a l v a
to power ON the monitor
A n n u l l a
S a l v a
N o n s a l v a r e
(or button
when
A n n u l l a
S a l v a
N o n s a l v a r e
A n n u l l a
S a l v a
N o n s a l v a r e
; on the screen
A n n u l l a
S a l v a
N o n s a l v a r e
(>3 seconds); icon
will
Mi 2538/1
- 15 -

Publicidad

loading