BURG-WACHTER KEY SAFE 60 L Manual De Instrucciones página 4

Operating instructions
Please read all instructions thoroughly before resetting the combination!
Resetting your KEY SAFE 60 L combination
1. Your KEY SAFE is factory preset to „0‐0‐0‐0."
2. Open the lockbox door.
3. Remove the rubber plug and slide the silver
reset lever, located on the inside of the KEY
SAFE door, and slide it in the direction the
arrow is pointing.
Note: The reset lever can only be moved when the dials are set at the current
combination. Select the new desired combination on the dials, keeping the door
open. Hold fingers on the reset lever to avoid it from coming out of position when
setting the combination.
4. Check the operation of the KEY SAFE using the new combination.
5. Slide the reset lever back to original position and replace the rubber plug.
Locking your KEY SAFE 60 L
1. Insert keys into the KEY SAFE key storage area.
2. Close the key storage area.
3. Move the dials to an alternate setting.
Installing & Replacing Battery
1. Open the KEY SAFE.
2. Remove the cover of the battery
compartment.
3. Install new battery (1x CR 2032).
4. Put the battery compartment cover
back in position.
5. Press the button to illuminate
the light for 10 seconds.
4 I English KeySafe 60 L