COMPONENTS*
1x A1051 Internet Firewall
1x Screw connection
terminal plug and
screw driver
DEVICE
Front
1) LCD Status display
Blue backlit LCD display for status and quick
error analysis
2) PWR LED
Power and diagnostic LED to display the
current status of the device.
3) 15VDC -/+ power supply
Screw terminal plug for connecting a DoorBird
power supply (available separately) to the device as
an alternative to PoE.
4) TO/FROM INTERCOM LAN/POE IN
RJ45 jack for connecting a network cable (Cat.5 or
higher) with the network segment that is attached
to the DoorBird IP devices. Use this port to power
the device with PoE as an alternative to the
power supply.
1x Installation manual
2x Phillips countersunk head
screws and dowels
Back
1
2
3
4
5
6
5) DIN Rail connector
Connection for DIN rail clip for DIN rail mounting
6) TO/FROM ROUTER LAN
RJ45 jack for connecting a network cable (Cat.5
or better) with the network segment that is
attached to the switch/router that provides an
active internet connection.
7) SET setup button
Button to set the device into different
configuration modes, e.g. to reset the device to
factory defaults.
8) Wall mounting brackets
Holder for wall mounting. Screws and dowels
included.
1x Quickstart guide
with Digital Passport
7
8
5