Bestway LAY-Z-SPA S200202 Manual Del Propietário página 3

WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment.
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS - RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don't plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
3