Publicidad
Step 6
Separate the EXTENSION SLIDES (N ) from the
å
EXTENSION RAILS (M) as shown in the upper diagram.
Be prepared, the parts are greasy.
Fasten the EXTENSION RAILS (M) to the UPRIGHTS (A
å
and B). Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
NOTE: For each EXTENSION RAIL, turn a SCREW into
å
the hole shown in the enlarged diagram. Then, slide the
innercartridge of the EXTENSION RAIL in to fi nd the other
hole that lines up with the hole in the END. Turn a SCREW
into this hole.
Push the release lever in and pull the SLIDE from the RAIL.
Open end
Finished edge
Page 10
N
M
B
M
M
A
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
415010
Open end
Finished edge
3S
www.sauder.com/services
Publicidad
