Worx WG761E Manual De Instrucciones página 14

18. CHARGE CORD INPUT
19. BATTERY INDICATOR BUTTON
20. SIDE-DISCHARGE COVER (SEE FIG. D2)
21. SIDE DISCHARGE-CHUTE (SEE FIG. D2)
22. BATTERY PACK* (SEE FIG. F1)
23. SAFETY KEY (SEE FIG. F1)
24. BLADE BOLT (SEE FIG. R1)
25. BLADE (SEE FIG. R1)
26. SPACER (SEE FIG. R1)
*Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
Type WG761E WG761E.9 (7- designation of
machinery, representative of Cordless Lawn Mower)
Voltage
No load speed
Deck width
14
Cutting width
Front wheel diameter
Rear wheel diameter
Cutting height
Cutting height positions
Grass collection capacity
Battery capacity
Battery type
Charger Model
Charger rating
Charging time for a
single battery pack
(approx.)
4.0 Ah
Machine Weight
Cordless Lawn Mower
WG761E WG761E.9
80V Max. (4x20V Max.)**
2800 /min
53 cm
51 cm
200 mm
250 mm
20 – 80 mm
7
70 L
4.0 Ah (WA3014)
Lithium-Ion
WA3974
Input: AC
100-240 V~50/60 Hz
Output: 20 V , 1 A
(each battery slot)
4-5 hrs
35 kg 32.4 kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 80 volts. Nominal voltage is
72 volts.
Each charging port is independent. The charging time for
four battery packs of the same capacity is equal to the
time for a single battery pack.
ACCESSORIES
Battery pack (WA3014)
Basecamp (WA3974)
(80V Power Source &
Charger)
Grass collection bag
Side-discharge kit
We recommend that you purchase your accessories from
the same store that sold you the tool. Choose the type
according to the work you intend to undertake. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection.
VIBRATION INFORMATION
/
Typical weighted vibration
Uncertainty
/
WARNING: The vibration emission value during actual
use of the power tool can differ from the declared
/
value depending on the ways in which the tool is used
dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
/
Using the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
WG761E WG761E .9
4 /
1 1
1
1
L = xx dB(A)
pA
3.0 dB (A)
L = xx dB(A)
wA
3.0 dB (A)
a < 2.5 m/s²
h
K = 1.5 m/s²
EN