Siemens SIMATIC HMI Instrucciones De Servicio Resumidas página 10

Electromagnetic compatibility
The HMI device is intended for operation in the EMC environment class Industry.
Ensure an EMC-compliant installation as described in the operating instructions.
NOTICE
Interference emission/interference immunity
The operation of the HMI device may cause radio interference in the living area.
Additional measures are required if higher EMC disturbances are expected at the place of use than intended for industrial
environments according to EN61000-6-2 (e.g. ESD).
ATEX/UKEX/IECEx device intended for use in potentially hazardous areas
If the device is intended for use in a hazardous area (gas-air or gas-dust mixture), observe the separate information on this in
the operating instructions. The intended use (e.g. ATEX zone, degree of protection, temperature class) is indicated on the
product (usually on the nameplate).
Note
As a rule, country-specific requirements for the operator also apply when a product is used in hazardous areas (e.g. Directive
1999/92/EC for the EU).
IP6x degree of protection
WARNING
Personal injury or property damage due to damaged seals
When properly installed, the built-in devices have IP6x degree of protection on the front and the PRO devices have IP6x
degree of protection on all sides. If device seals are damaged, for example, during maintenance work, moisture or liquids
can enter the device or the enclosure or cabinet. Personal injury or property damage caused by a short circuit or electric
shock may result.
Check the device and its seals for integrity before assembly. Take care not to damage the device seals during assembly and
maintenance work.
Display and touchscreen
WARNING
Personal injury or property damage due to damaged touchscreen
Improper handling, such as applying massive force or operating the panel with sharp or pointed objects, can damage the
touchscreen of the HMI device. A damaged touchscreen can lead to anything from malfunctions of the system to personal
injury.
Observe the notes on proper handling of the touchscreen in the associated operating instructions. Immediately replace any
device that has a defective touchscreen.
Cleaning
Only clean the devices when they are switched off or when the clean screen is activated (provided the "Clean Screen"
function is available).
Clean the front of the device and, in the case of PRO devices, the enclosure, with a damp cloth. Use dishwashing liquid or
foaming screen cleaning agent.
Observe the information on chemical resistance (https://support.industry.siemens.com/cs/ww/en/view/39718396) and
supplementary information in the operating instructions.
Maintenance and repair
The product is maintenance-free. Repairs to the product may only be carried out by the manufacturer. Observe the
information in the operating instructions.
Basic Panels, Comfort Panels, Unified Comfort Panels, Industrial Thin Client, Industrial Flat Panels, Classic Panels
A5E51753485-AA, 03/2022
9