MSW Motor Technics MSW-WOT-50 Manual De Instrucciones página 28

For MSW-WOT-30 model:
4. Place a vessel, from which the old oil will be disposed of later, under the drain
valve of the recovery tray and unscrew the valve. Control the process of draining
the recovery tray. Unscrew the valve when the process is complete.
If it is not possible to empty the recovery tray at the same time, you should
constantly check the filling level of the recovery tray and close the drain plug when
the recovery tray is almost full.
3.4. Cleaning and maintenance
a) Store the device in a dry and cool place protected from moisture and direct
sunlight.
b) Regularly inspect the device for technical failure and damage.
c) Use a soft, damp cloth for cleaning.
d) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or metal
scraper) as these may damage the surface of the device.
e) Used oil shall be disposed of in accordance with local regulations.
f) Clean the device stained with oil on the outside with a soft cloth or a brush and
using, for example, gasoline or other non-aggressive degreasing and cleaning
agents for workshop applications.