Festool SSU 200 EB Manual De Instrucciones página 26

English
time required for the chain to come to a
stop after the power tool is switched off.
We recommend placing the saw down level
on the guide table or the Systainer.
– If the power tool is not being used, always
attach the guard to the chain; this also ap­
plies when carrying the power tool.
– Never carry the power tool with the chain
running.
– When not in use, the power tool must be
kept in a safe, dry and locked place, out of
the reach of children and unauthorised
persons.
2.4 Other risks
Even when the power tool is used as per the
recommendations and all safety instructions
have been adhered to, the design engineering of
the power tool and its use mean that the follow­
ing safety risks may arise:
– Injury at teeth when replacing the chain.
– Injury when touching the chain in the cut­
ting area.
– Clothing drawn in by running chain.
– Injury from saw offcuts or tool parts flying
off.
– Danger caused by movable supply cable.
– Kickback from chain jamming or working
with the point of the strip.
– Hazardous concentration of dust when
working in rooms with insufficient ventila­
tion.
– Injury caused by touching live parts when
disassembling the power tool or its parts if
the mains plug of the movable supply line
has not been removed from the socket.
– Hearing damage when working for pro­
longed periods without hearing protection.
2.5 Emission levels
Measured values determined according
to EN 62841.
The A-rated noise level of the machine is typi­
cally:
Sound pressure level
Sound power level
Acoustic output value measured according to
established directive 2000/14/EC, Annex VI.
26
Evaluation methods for conformity in accord­
ance with Annex VI. Product category: 6.
Named body:
SLG Prüf- und Zertifizierungs GmbH
Burgstädter Straße 20
09232 Hartmannsdorf
Germany
The specified emission levels (vibration, noise)
–
–
–
3
L = 91 dB(A)
PA
3.1
L = 102 dB(A)
WA
The SSU 200 EB sword saw was developed for
multi-purpose carpentry work. The power tool
can make rectangular cuts and adjustable an­
gle cuts to a depth of 200 mm. Various types of
chains allow you to select the right tool for the
job.
A cutting angle as large as 60° can be set
quickly and precisely using two tilting segments
Measured sound power lev­
el
Uncertainty
Guaranteed sound power
level
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
The hand/arm vibration is typi­
cally
Uncertainty
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► Assess the actual load during the entire
operating cycle.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
Intended use
Functional description
L = 102 dB(A)
WA
K = 3 dB
L = 104 dB(A)
WAd
a = 3.0 m/s 2
h
K = 1.5 m/s
2