MADISON MAD-KEPLER120 Manual De Uso página 4

ENGLISH
16. Increase echo effect
17. MIC priority: If you use the Karaoke function and the song is playing at the same time, press this button and
the MIC sound will override the sound from USB /SD.
18. Adjustment of high frequencies
19. Volume adjustment
20. Number buttons: In USB /SD mode: press to access directly the track
INSTALLING THE BATTERIES IN THE REMOTE CONTROL
Remove the battery cover from the back of the remote control as shown and insert 2x AAA size
batteries ensuring correct polarity
TURNING THE UNIT POWER ON/OFF
• Connect the mains lead into an outlet.
• Press power button on the back of the unit to the ON position.
BLUETOOTH® PAIRING
• Switch on the speaker and press MODE button to choose B luetooth status.
• Search and connect the B luetooth appliance MAD-KEPLER120 on your phone or laptop
• Shortly press PLAY/PAUSE button to play or pause music. Short press "" or "" key to select the previous or
next track
TWS PAIRING MODE:
• Make sure both speakers are OFF.
• Go to your phone's B luetooth interface and make sure that it is not connected to either of the speakers. If
your phone is connected, remove the speakers from the list of available devices.
• Turn both speakers ON, press the PLAY/PAUSE button on both speakers. The word « B LUE » should appear on
both displays and flash intermittently.
• Press the « PLAY/PAUSE » button on either one of the speakers for 5 seconds. B oth units will enter pairing
mode.
• One of the units will show the word « B LUE » on the display. This is the master unit and will act as the left
channel, while the other one will be the slave unit and will act as the right channel.
• Go to your phone's B luetooth interface and select « MAD-KEPLER120 » from the list of available devices. If
pairing is successful, the word B LUE on the master unit will stop flashing.
• To disconnect the speakers, select any other mode on either one of the speakers.
LINE INPUT
• Press MODE button to choose LINE mode.
• Use an audio lead with one 3.5 mm stereo plug on each end.
• Plug one end into the LINE IN jack on the top panel and plug the other end of the cable into the Line-out or
Headphone Jack of your external audio appliance
• Turn ON your external audio appliance
USB MODE:
• After startup, press MODE to select "USB " and insert the USB device into the USB socket (6). The unit will
automatically read and play the music in the USB device.
• Press "‣ " key shortly to pause or play the track.
• Shortly press " " key to skip to the previous track.
• Shortly press "" key to skip to the next track.
USB CHARGING FUNCTION
Connect your smartphone to this input (4) to charge your battery. The socket supplies an output voltage of 5V��
1.5A.
MICRO SD MODE:
• After startup, insert the TF card. The unit will automatically read and play the music in the TF card.
• Press "" key shortly to pause or play the music.
4
© Copyright LOTRONIC 2021