Publicidad
Idiomas disponibles
Idiomas disponibles
7. TECHNICAL SPECIFICATIONS
Power: 20 V
No load speed: 0-900 rpm
Impact energy: 1.2 J
Max impact rate: 0-5000 bpm
SDS: 10 mm
Functions: driver and pneumatic hammer, forward and reverse rotation, on-off switch and variable
speed.
Includes: soft grip handle and LED light.
Wear hearing protection!
Vibration total values ah (triax vector sum) determined according to EN 60745-2-6.
Sound level LwA = 95.0 dB (A)
Sound level LpA = 84.0dB (A)
Vibration: ah,HD = 4,366 m²/s
The vibration level given in this information sheet has been measured in accordance with a standar-
dised test given in EN 60745 and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
8. OPERATION
Preparation
Charging the battery pack
Before first use and when the battery capacity is too low you have to fully charge it.
1. Press the release buttons and pull the battery pack from the power tool.
Press & pull
2. Connect the charger jack to the socket and then connect the charger to a suitable power socket.
The charging indicator on the adaptor lights up in red.
Note: The charger adaptor and battery pack will get warm during charging process. This is normal
and no reason to be worried.
3. Once fully charged the charging indicator turns green. Disconnect the adaptor from the power
socket and the charger jack from the socket.
7
Publicidad
