Daewoo DALRH18-1 Manual De Usuario página 9

About the charger
Disconnect the feeding before connecting or disconnecting the battery
The charger must be used only with rechargeable battery. Never use un-rechargeable battery.
Do not expose the charger to rain or water.
Application tools
Always use suitable applications tools, e. g. never use a metal drill for drilling into wood.
Illustration
Note: SDS application tools can directly be inserted to the SDS drill chuck.
Attach SDS application tools
1. Pull the chuck sleeve backward and insert the SDS application tool with a twisting motion.
2. Release the chuck sleeve to lock the SDS application tool in place.
Remove/exchange SDS application tools
Warning! Application tools can be sharp and very hot after use! Handle them with care to avoid
personal injuries! Wear protective gloves when exchanging or removing application tools if neces-
sary!
1. Pull the chuck sleeve backward and remove the SDS application tool.
2. Insert a new/other application tool and fix as described above.
Description Application
Masonry drill Hammer drilling into masonry
Metal drill Drilling into metal and plastic
Wood drill Drilling into wood
8