Bosch GWX18V-13C Instrucciones De Funcionamiento Y Seguridad página 16

Installing Wheel Guards
(Type 27 and Type 41/1A
Wheel Guards)
A Type 27 guard must be
used
wheels, bonded body sanding flap discs, wire
brushes and wheels. The tool may be used with-
out a guard only when sanding with convention-
al sanding discs.
To attach guard:
1. Unplug tool from power source.
2. Position appropriate guard on collar mount
so arrows on guard and collar mount align
(Fig. 6).
3. Rotate wheel guard clockwise 90º until
guard clicks in place.
4. Adjust guard by depressing guard re-
lease button and rotate to desired po-
sition. Always
between operator
and direct sparks away from operator
(Fig. 7).
5. Allow guard release button to click in place.
To remove wheel guard:
1. Depress guard release button and rotate
guard until arrows on guard and collar mount
align (Fig. 6).
2. Remove guard from collar mount.
160992A5K0 GWX18V-13CP 202206.indd 16
Assembly
with all grinding
position wheel guard
and work piece
Fig. 6
Fig. 7
OPERATING ZONE
-16-
6/27/22 7:17 AM