Publicidad
Idiomas disponibles
Idiomas disponibles
General Power Tool Safety Warnings:
Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term " power tool " in the warnings refers to your mains-operated (corded) power tools or
battery-operated (cordless) power tools.
Work Area Safety
1.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
a.
Do not operate power tools in explosive atmospheres, such as in the pres- ence of flammable
b.
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distrac- tions can cause you
c.
to lose control.
Electrical Safety
2.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
a.
adapter plugs with grounded power tools. Unmodified plugs and match- ing outlets will reduce
risk of electric shock.
Avoid body contact with grounded surfaces such as pipes, radia- tors, ranges and refrigerators.
b.
There is an increased risk of electric shock if your body is grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
c.
the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplug- ging the power tool.
d.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suit- able for outdoor use. Use
e.
of a cord suitable for outdoor use reduces the risk of elec- tric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device
f.
(RCD) protected supply.Use of a RCD reduces the risk of elec- tric shock.
NOTE:The term residual current device (RCD) may be replaced by the term ground fault
circuit interrupter (GFCI) or earth leakage circuit breaker (ELCB)
3.
Personal Safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do
a.
not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as
b.
dust mask, non-skid safety shoes, hard hat, or hearing protec- tion used for appropriate condi-
tions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
c.
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools that have the switch on invites accidents.
d.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
- 01 -
Publicidad
