Publicidad
Idiomas disponibles
Idiomas disponibles
c.
FUNCTION DESCRIPTION
6
10 21
11
12
3
13
20
18
15
8.
Assembly:
WARNING:Before any work on the machine itself, keep the mains plug out of the supply.
To avoid accidental starting, make sure Lock-Off button is not engaged prior to plugging in tool
and you finger is not touching the on/off switch trigger.
Mounting/Replacing the Saw Blade
For changing the cutting tool, it is best to place the machine on the face side of the motor housing.
Removal of the Saw Blade
a.
Press the lock button (19) and keep it pressed.
The The spindle lock button (19) may be actuated only when the saw spindle is at a standstill.
Otherwise, the power tool can be damaged.
b.
With the allen wrench (9), unscrew the bolt (13) turning in rotation direction.
c.
Tilt back the retracting blade guard (2) and hold firmly.
d.
Remove the clamping flange (13) and the saw blade (1) from the ma- chine.
Mounting the Saw Blade
a.
Clean the saw blade (1) and all clamping parts to be assembled. b.Tilt back the retracting blade
guard (2) and hold firmly.
c.
Place the saw blade (1) on to the mounting bolt (13). The cutting direc- tion of the teeth (direc-
tion or arrow on saw blade) and the direction-of-rota- tion arrow on the blade guard (2) must
correspond.
d.
Mount the blot & screw (13) in turning in rotation direction. e.Press the spindle lock button (19)
18
14
15
4
2
1
9
19
16
5
10
17
11
12
3
- 05 -
1.Saw Blade
2.Lower Blade Guard
3.Base plate
20
4.Lower Guard Lever
5.Dust Extraction Port
6.Upper Blade Guard
7.Rip Guide 8.Vacuum Adaptor
9.Allen Wrench for Blade
8
10.Bevel Scale Bracket
11.Bevel Clamp Lever
7
12.Rip Guide Locking Screw
13.Blade Bolt & Washer
14.Lock-Off Button
15.ON/OFF Switch
16.Depth Guide Bracket
17.Depth Clamp Lever
18.Rear Motor
19.Spindle Lock Button
20.Allen Wrench Storage
21.Laser
Publicidad
